rayvaflav

Here's what I got. I purchased a few 327 engines while searching for a 327 "driver mill" for my '66 and I purchased a 1963 Corvette engine that I would like to sell. I am listing this engine as a short block as it has later model heads and an aftermarket aluminum carbureted intake manifold.

Here's the info that I have :

Engine Casting #3782870

Nice stamp pad deck as follows : 3105819 F1121 RF (K162 Build Date) November 1962

This would be a great engine to build for a November through February built Corvette. Please take a good look at the photos, the engine has not been run in awhile so expect a rebuild. If you have a '63 Corvette roadster or split window coupe with the VIN 05819 this could be your lucky day ...

I have since removed the oil pan and found that rod #1 has come loose at one time (this is how I purchased the engine, unknowingly) and have therefore reduced the price and am therefore representing this engine as a 360 FI RF shortblock (of course, the buyer gets the engine with the incorrect heads and intake manifold, the Corvette script valve covers and carburetor are not included in the sale (I just wanted to give a good idea of how it would look with the correct Corvette parts).

Price: $950.00 or best offer, the buyer is responsible for shipping but I can deliver the engine on a pallet to your shipper in Oklahoma City, that will save you some money. Please feel free to contact me at rayvaflav@hotmail.com for more info and photos.

Ray

rayvaflav

Check out this link to another '63 engine for sale, go to the last post and there's the heads that you need for this engine. Sweet !

http://forums.corvetteforum.com/c1-a...-block-re.html

Ray

rayvaflav

I need this engine stand for my next mill. Howzabowt I add a "or best offer" to the ad ? Let me know what you think, I'm both negotiable and accommodating .... despite what others may tell you.

Ray

rayvaflav

* just between you and me, the eBay reserve is close to half of my asking price, don't let it get around ....

rayvaflav

The eBay auction ends this evening and the reserve has been met. It would be neat if ayone here had a '63 close to this VIN:

http://www.ebay.com/itm/120817510431...witem=&vxp=mtr

Ray