'68---'72 Vette parts for sale
03-16-2011, 03:36 PM
#1
Former Vendor
Thread Starter
FS '68---'72 Parts--combined posts-long thread
Hi all,
This first post is a WTB request. Please scroll down to see many (about 40) FS posts.
I need a 1968 (only) telescopic steering column hub. Casting number 3923697
This is the piece the steering wheel is mounted on.
I can get the part number if that would help.
I have actually located one for $150.00, but would like to pay $100.00.
I have many '68 only parts for trade also.
Thank,
George
210 748 4693
This first post is a WTB request. Please scroll down to see many (about 40) FS posts.
I need a 1968 (only) telescopic steering column hub. Casting number 3923697
This is the piece the steering wheel is mounted on.
I can get the part number if that would help.
I have actually located one for $150.00, but would like to pay $100.00.
I have many '68 only parts for trade also.
Thank,
George
210 748 4693
Last edited by Corvettes by George; 07-09-2012 at 12:36 AM.
03-17-2011, 08:11 AM
#2
Former Vendor
Thread Starter
f/s '68 and C3 parts
Hi all,
I have quite a few '68 and C3 parts for sale.
All of these parts are original GM issue removed from Vettes over my 30 years involved with this hobby/obsession.
Condition varies from "useable/better than nothing", to "as new", rechromed, and some NOS.
I have a ton of photos in my photobucket albums.
Type 435rdster-photobucket into your browser and you will have access. I will try to post a link later.
Many of the photobucket photos have prices and descriptions, and I will be working on updating the remaining items.
Prices are OBO plus shipping.
There are many, many items not yet photographed, so please ask if there is something you need that is not seen in the albums.
Please e mail geopar@gvtc.com or call 210 748 4693 for more info/photos/etc..
I am in South Central Texas, just North of San Antonio.
I accept cash, money orders, Paypal, personal checks (must clear before I ship), and barter (trades).
I ship via USPS, UPS, Fedex, Bus, and various freight companies for the heavier items (engines, frames, etc.).
I do not charge for packaging/handling (unless I need to build a crate for an engine, etc.), glad to combine shipments to reduce costs, and will ship according to your request (ie: Carrier of your choice, ammount of insurance, Sat. delivery, signed, etc.).
In some instances I may be able to personally deliver or meet you if I happen to be going your way---this is generally in the Texas areas of Dallas and Houston, but I do make some road trips and have contacts with over the road truckers that can at times be utilized.
Thanks,
George
I have quite a few '68 and C3 parts for sale.
All of these parts are original GM issue removed from Vettes over my 30 years involved with this hobby/obsession.
Condition varies from "useable/better than nothing", to "as new", rechromed, and some NOS.
I have a ton of photos in my photobucket albums.
Type 435rdster-photobucket into your browser and you will have access. I will try to post a link later.
Many of the photobucket photos have prices and descriptions, and I will be working on updating the remaining items.
Prices are OBO plus shipping.
There are many, many items not yet photographed, so please ask if there is something you need that is not seen in the albums.
Please e mail geopar@gvtc.com or call 210 748 4693 for more info/photos/etc..
I am in South Central Texas, just North of San Antonio.
I accept cash, money orders, Paypal, personal checks (must clear before I ship), and barter (trades).
I ship via USPS, UPS, Fedex, Bus, and various freight companies for the heavier items (engines, frames, etc.).
I do not charge for packaging/handling (unless I need to build a crate for an engine, etc.), glad to combine shipments to reduce costs, and will ship according to your request (ie: Carrier of your choice, ammount of insurance, Sat. delivery, signed, etc.).
In some instances I may be able to personally deliver or meet you if I happen to be going your way---this is generally in the Texas areas of Dallas and Houston, but I do make some road trips and have contacts with over the road truckers that can at times be utilized.
Thanks,
George
Last edited by Corvettes by George; 01-25-2012 at 06:35 AM.
03-17-2011, 11:40 AM
#3
Former Vendor
Thread Starter
F/S '69 Big Block Parts
Hi all,
I did some interior and paint work on a neighbor's '69 427 and got partial payment in parts he had removed from the vette years ago.
Here's the list and asking prices. Offers accepted.
All parts in very good to excellent condition unless otherwise noted.
1) 928 TI dist. with amp and harness (w w/g wire pigtail cut)-$ 850.00---Very nice Transistorized dist.--Offers?
2)SOLD--- Original big block hood, red, nice chrome insets, latches---$1,000.00---Offers? --SOLD
SOLD---3) '69 only wiper motor with headlight washer pump----------$ 350.00---SOLD--have 2 more. I have a few of the headlight washer pumps also.
4) wiper door actuator and bracket--------------------------$ 75.00
5) wiper door override switch------------------------------- $ 50.00----On the cowl.
6) 827/828 exhaust manifolds w/A.I.R holes------------------$ 500.00---These are very nice and originals
7) Standard steering column w/key, nice condition-----------$ 250.00--nice, good turn signal switch.
8)SOLD-- exhaust panel (under car exhaust) (one repair-original)----$ 100.00--SOLD
9) big block dist shielding-----------------------------------$ 50.00
SOLD--10) 621 bell housing----------------------------------------$ 175.00----SOLD--Thanks
11) washer bag with original cap/hose-----------------------$ 125.00---SOLD--Thanks CF---Have 3 more of these
12) 4 ralleys (no trim) dated K18 9 19AZ (Sept. 19, 1968) $ 250.00---Good original ralleys--Have a bunch or rings and caps
13) steering box (unknown condition, but he said it was fine?) $ 50.00
SOLD--14) A/C components--complete (except for the wiper bezel and the console control/vacuum tubing)---inner and outer boxes, hard lines, mufler, brackets, evap, condensor, ducting, 3 groove water pump pulley, compressor, etc.--SOLD--have a few more pieces
This is all big block stuff; Don't really know what to ask for it and will consider parting out--I know that pulley is worth a pretty penny.
I'll start by asking $1,000.00 for the lot OBO.---SOLD---Thanks CF
I have some misc. a/c pieces--brackets, evap boxes, ducting, compressors, hoses, brass caps, a/c wiper bezels, a/c control units with complete vacuum tubing, inner boxes and controls, flappers, vacuum, wiring, Big Block brass expansion tanks and brackets, etc., etc.
I do have a correct wiper bezel, the console controls, the vacuum tubing, and any electrical that is needed from another '69 a/c car.
He kept that stuff in his Vette for appearances/fill the holes.
He has a nice set of big block pipe/mufflers and tips--very low mileage in great condition---$300.00?
Also has a nitrous kit.---If interested I'll get the specific info.
Thanks,
George
210 748 4693
geopar@gvtc.com
I did some interior and paint work on a neighbor's '69 427 and got partial payment in parts he had removed from the vette years ago.
Here's the list and asking prices. Offers accepted.
All parts in very good to excellent condition unless otherwise noted.
1) 928 TI dist. with amp and harness (w w/g wire pigtail cut)-$ 850.00---Very nice Transistorized dist.--Offers?
2)SOLD--- Original big block hood, red, nice chrome insets, latches---$1,000.00---Offers? --SOLD
SOLD---3) '69 only wiper motor with headlight washer pump----------$ 350.00---SOLD--have 2 more. I have a few of the headlight washer pumps also.
4) wiper door actuator and bracket--------------------------$ 75.00
5) wiper door override switch------------------------------- $ 50.00----On the cowl.
6) 827/828 exhaust manifolds w/A.I.R holes------------------$ 500.00---These are very nice and originals
7) Standard steering column w/key, nice condition-----------$ 250.00--nice, good turn signal switch.
8)SOLD-- exhaust panel (under car exhaust) (one repair-original)----$ 100.00--SOLD
9) big block dist shielding-----------------------------------$ 50.00
SOLD--10) 621 bell housing----------------------------------------$ 175.00----SOLD--Thanks
11) washer bag with original cap/hose-----------------------$ 125.00---SOLD--Thanks CF---Have 3 more of these
12) 4 ralleys (no trim) dated K18 9 19AZ (Sept. 19, 1968) $ 250.00---Good original ralleys--Have a bunch or rings and caps
13) steering box (unknown condition, but he said it was fine?) $ 50.00
SOLD--14) A/C components--complete (except for the wiper bezel and the console control/vacuum tubing)---inner and outer boxes, hard lines, mufler, brackets, evap, condensor, ducting, 3 groove water pump pulley, compressor, etc.--SOLD--have a few more pieces
This is all big block stuff; Don't really know what to ask for it and will consider parting out--I know that pulley is worth a pretty penny.
I'll start by asking $1,000.00 for the lot OBO.---SOLD---Thanks CF
I have some misc. a/c pieces--brackets, evap boxes, ducting, compressors, hoses, brass caps, a/c wiper bezels, a/c control units with complete vacuum tubing, inner boxes and controls, flappers, vacuum, wiring, Big Block brass expansion tanks and brackets, etc., etc.
I do have a correct wiper bezel, the console controls, the vacuum tubing, and any electrical that is needed from another '69 a/c car.
He kept that stuff in his Vette for appearances/fill the holes.
He has a nice set of big block pipe/mufflers and tips--very low mileage in great condition---$300.00?
Also has a nitrous kit.---If interested I'll get the specific info.
Thanks,
George
210 748 4693
geopar@gvtc.com
Last edited by Corvettes by George; 05-05-2013 at 11:14 AM.
03-20-2011, 02:13 PM
#6
Former Vendor
Thread Starter
F/S brass big block exp. tanks with a/c
Big Block with a/c expansion tanks.
I have 3 of these, but one may be sold.---J69 SOLD
These are nice, no corrosion, good hose nipples, etc.
Have original brackets and bolts also.
Looking for $225.00 for tank, and $225.00 for set of brackets.
The one pending is dated J69, the other two are dated 70 and 71 (don't have the months in front of me).
Thanks,
George
210 748 4693
I have 3 of these, but one may be sold.---J69 SOLD
These are nice, no corrosion, good hose nipples, etc.
Have original brackets and bolts also.
Looking for $225.00 for tank, and $225.00 for set of brackets.
The one pending is dated J69, the other two are dated 70 and 71 (don't have the months in front of me).
Thanks,
George
210 748 4693
Last edited by Corvettes by George; 03-23-2012 at 12:08 PM.
03-25-2011, 07:48 PM
#12
Racer
03-27-2011, 09:58 PM
#16
Drifting
PM sent. I bought a vacuum reserve tank from geopar. Thanks as described and a fair price
Last edited by twinpack; 03-27-2011 at 10:00 PM.
03-28-2011, 07:35 AM
#18
Former Vendor
Thread Starter
[QUOTE=cdj46;1577180349]Iam looking for a
left side good trailing arm-------- Bare or complete?
68/69 left side grille--------------plastic only?
and a BB water pump------------ Date needed?
Have all, please advise on above questions.
Thanks,
G.
left side good trailing arm-------- Bare or complete?
68/69 left side grille--------------plastic only?
and a BB water pump------------ Date needed?
Have all, please advise on above questions.
Thanks,
G.
03-28-2011, 04:30 PM
#19
[QUOTE=1960fi;1577183600]
Trailing arm Bare
Grille plastic is OK
BBwater pump GM 68 prefer 69 OK I can rebuild.
Thanks
Chuck
Grille plastic is OK
BBwater pump GM 68 prefer 69 OK I can rebuild.
Thanks
Chuck
