0SDLIFE

MODERATORS... I UNDERSTAND THIS IS NOT A CORVETTE OR CORVETTE FRAME.... BUT ALL COMPONENTS ARE FROM A C5 CORVETTE BESIDES THE TRANSMISSION... SO MAYBE I CAN GET A PASS ON THIS ONE... THANKS


2010 FACTORY FIVE GTM FOR SALE OR TRADE... NOT LOOKING TO TRADE UP BUT WILL TAKE A TRADE IN TOWARDS MY CAR PLUS CASH.



Car was built with a 2002 donor z06 vette parts



Extremely rare and high hp. g50/50 rebuilt by renegade hybrids...i have gear ratio chart to prove it all and all paperwork. Cost on trans was 12,500 with out clutch kit, cv's, starter, ring gear, throw out bearing, axles, etc. all those parts were purchased from california motor sports and i have receipts as well for that.



Kit number #114

2002 ls6 donor car build with 50 k miles

Very rare g50-50 rebuilt by renegade hybrids

new stage 2 sachs cluct kit, new starter, new ring gear, new cv's and slave cylnder

All black suede headliner and all panels wraped in black suede with 1/4" memory foam

a ton of dyno mat and dyno pad every where you can imagine

ffr vintage a/c & heater unit

Russ thompson skid kit

david bordons door stops

richard oben seat belt bar

5 point racing harness seat belts

Brand new brake pads and rotors

Brandwood cable shifter kit

all black PPG paint...

richard oben headlight lens covers

factory five DOT rear quarter windows

7" touch screen with navigation, back up camera w/ night vision, dvd player, 2-6.5" pioneer 3 way speakers

new black MMR staggard 20" rears and 19" fronts, rear rims have about a 5" rear lip and the front is about 2" lip. very aggressive look.

car is complete and needs nothing... I can help with shipping or can drive the car within 500 miles free of charge.

asking 49 K or best



reduced to 45 K for quick sale...



please call mike antyime at 951-256-0301



Thanks

MIKE



here are some you tube videos...





http://www.youtube.com/watch?v=GxIN-...eature=channel

http://www.youtube.com/watch?v=qxTwO...eature=channel

http://www.youtube.com/watch?v=mQTsK...eature=channel

JDaniel

What are you looking for trades? I have a 1999 FRC with about $30,000 invested. Its close to being a 9 second car with a best pass of 10.3 with little practice. PM me here or email me at jdanielm1@yahoo.com. Im very interested!

0SDLIFE

im up to any trade thats got to be worth it.. I just emailed you as well.
thanks

runwhatchabrung

beautiful ride. What does that thing weigh?

0SDLIFE

THANKS FOR THE COMPLIMENT... SHE WEIGHS AROUND 2400 LBS GIVE OR TAKE...

1 BAD BURB

See ya made it on here too Mike. Lol

I'm trying to part out my car as we speak, hopefully we can make a deal. But as we discussed, this is a toughie for both of us. Hopefully u don't sell till I'm ready!!! Lol. Kidding. Best of luck bud.

To all, this seller is a stand up guy. Talked to him for a while and he was up front about everything. This car is def bad *** and the new owner will have the hottest car in town!

0SDLIFE

THANKS FOR THE KIND WORDS...

beastmar

i've never seen a car like this. Beautiful car. GLWS

Canute

Is it registered?

0SDLIFE

It is in the process. already did california highway patrol inspection, then brake and lamp inspection, then smog refferree for sb100 process. I already did all three and passed. just waiting for my dmv appointment to turn everything in and get plates. For right now it is temp. regestered and still can be sold now or after dmv.

thanks
mike

0Superman09

PM me if interested in my car...... Let me know what you'd need!

http://forums.corvetteforum.com/c5-c...peed-look.html

0SDLIFE

pm sent....

thanks
mike

Z06X

I run a company that builds GTM's in Pa. I wouldn't trade this car for ANY less than a C6Z unless it was C5Z and a descent amount of cash.

I drive an LS2 GTM weekly to work and to shows. Our car has 398whp/425wtq and the thing is a beast. Even at that power level I pull C6Z's on the straights. These GTM's are non stop attention all day long, they are just pretty tight to get in and out of. Interior temps can be pretty bad based on the builders experience. The A/C is a MUST.

If anyone purchases or trades for this car, feel free to contact me for assistance, upgrades, etc. We use the GTM as a base, but we've enhanced the car substantially with more interior room, improved balance, improved maintainability, etc. The result of building many of these cars. Plus, we can issue a VIN for these!


GLWS! Can't go wrong going with a Corvette though.

0SDLIFE

You are absolutely right... LOL I think im going to post this in the c6 section instead... do you go on the factory five forum boards as well.. if so whats your screen name...

and thanks for the info so everyone can really see what this car is capable of...

Z06X

Just to add in, if anyone reads Factory Fives outline of what this car is supposed to cost, certainly write that off. They outline 45,000.00 roughly to finish the car, and while that is POSSIBLE, you certainly will have to shop like crazy and your car will be very basic and raw. If you finish the car properly, your looking at 85k plus your labor. C6Z's are pullin 45k bottom dollar and in my book are a MINIMUM trade for this car.

boyd411@gmail.com

I am interested in your GTM if it is still for sale. Please let me know ASAP.
You can email me at boyd411@gmail.com Please let me know if it is still available or not. Thanks very much.
Hugh Casey

msatchmo

Very cool car GLWS

Madmikeee

OMG I WANT ...I WANT BAD!!!


Why can't I have money???? oh yeah, that's right unemployed wife and a kid

Awesome car, looks well worth the money. Best of luck!!

You have any build pics? I am sure we would all love to see some!

MVP'S ZO6

Mike I can't believe your selling this thing?

1 BAD BURB

Mike sold this car about a month ago already. Hell of a deal for new owner. I wanted to buy it myself but woman said no... Bought a maserati instead. I'm still longing for his GTM tho...