So what do I need to get goin?
#1
Drifting
Thread Starter
So what do I need to get goin?
What do I need to program chips for my 86 ? Right now, I have a full version of TunerPro RT and an ALDL cable, and of course a laptop. Currently my 86 has a Hyperchip in it. Im planning on getting bigger injectors. My questions are
1. What burner equipment do I need?
2. Do I need any adapters for the ECM for chips?
3. Will I need a wideband O2 sensor installed?
help
1. What burner equipment do I need?
2. Do I need any adapters for the ECM for chips?
3. Will I need a wideband O2 sensor installed?
help
#2
Race Director
Member Since: Sep 2003
Location: Database Error Indiana
Posts: 16,621
Received 233 Likes
on
165 Posts
You need a G2 chip adapter, some chips and a Burn2. Moates has all you need and you can download the software from his site. You also need the correct xdf file and a bin file to start with. Those are on Moates site too, I think. Wide band helps but not required.
#3
http://forums.corvetteforum.com/1574137209-post4.html
In your case you need the 6E files to suit your " 165 ECM
In your case you need the 6E files to suit your " 165 ECM
#4
Race Director
Member Since: Sep 2003
Location: Database Error Indiana
Posts: 16,621
Received 233 Likes
on
165 Posts
http://forums.corvetteforum.com/1574137209-post4.html
In your case you need the 6E files to suit your " 165 ECM
In your case you need the 6E files to suit your " 165 ECM
Last edited by JackDidley; 05-28-2010 at 11:21 PM.
#5
#8
Le Mans Master
Member Since: Aug 2000
Location: Sydney Australia
Posts: 8,837
Likes: 0
Received 30 Likes
on
29 Posts
Steep learning curve but time to study.
http://www.thirdgen.org/techboard/di...ning-just.html
http://www.thirdgen.org/techboard/di...ning-just.html
The computers (ECM ) are identified by the factory part #
ECM '165 refers to the #1227165 computer installed in '86 -'89 TPI cars ( Vette and F-bodies )
The ECM has a chip in it .
See
http://www.thirdgen.org/techboard/df...om-calpak.html
On the chip is the file ( the BIN ) that contains the information to run the engine.The BIN's are identified from the factory by a 4 letter code; ARAP mentioned is for a '89 Vette auto car.
Consider the $32 and $6E as the operating system ; just like you could have XP or Vista on your computer
Most ECM's will only operate with one particular system but the '165 ECM will work with both mentioned.The $6E is the later version with more features ( for tuning )
http://www.thirdgen.org/techboard/di...ning-just.html
http://www.thirdgen.org/techboard/di...ning-just.html
The computers (ECM ) are identified by the factory part #
ECM '165 refers to the #1227165 computer installed in '86 -'89 TPI cars ( Vette and F-bodies )
The ECM has a chip in it .
See
http://www.thirdgen.org/techboard/df...om-calpak.html
On the chip is the file ( the BIN ) that contains the information to run the engine.The BIN's are identified from the factory by a 4 letter code; ARAP mentioned is for a '89 Vette auto car.
Consider the $32 and $6E as the operating system ; just like you could have XP or Vista on your computer
Most ECM's will only operate with one particular system but the '165 ECM will work with both mentioned.The $6E is the later version with more features ( for tuning )
Last edited by rodj; 05-29-2010 at 09:30 AM.