LS3 VS LS7 Heads
#2
Team Owner
Slightly larger valves:
LS3: 2.16" intake, 1.60" exhaust.
LS7: 2.20" titanium intake, 1.61" sodium filled exhaust
(These might present an issue with piston relief areas, depending on valve lift used, not sure.)
Combustion chamber volume:
LS3: 68.7 cc
LS7: 70cc
The LS3 uses a rectangular shaped intake port that is a bit taller than the LS3's port. This can create some minor flow issues if used with the LS3 intake manifold.
Fit
The bolt patterns and other features should be the same on all LSx engines (I think that is true) but you have to be careful to match intake manifolds, and the slightly larger chamber volume will change your compression ratio just a tad, although not severely, and may also present some flow issues because the combustion chamber will hang over the edges of the bore just a smidgen... probably not a big deal, tho.
Those are the only major differences I'm aware of.
#4
Le Mans Master
Doesn't the LS7 have a D shaped exhaust port, while the LS3 has the LS2/1 style round exhaust port?
#5
Racer
#6
Race Director
Member Since: Dec 2006
Location: Fort Worth, Texas
Posts: 11,114
Received 2,050 Likes
on
1,303 Posts
#7
Race Director
Member Since: Dec 2006
Location: Fort Worth, Texas
Posts: 11,114
Received 2,050 Likes
on
1,303 Posts
#8
Instructor
Member Since: Jan 2005
Location: Tyler TX
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts