silverbullit2006

I have a 06 M6 and i was looking around the internet and didn't find to much info on what cam was the best as for performance. I use to have a 05 mustang gt and had comp stage 2 cams and loved them but im not sure what everyone else is using so i wanted some input on this. I have a vararam intake, bb bullets and thats about it for now, im not looking to change gears or put a blower on (would be nice though) i want a cam that will work with a ported/polished fast intake and tbody and just basic bolt ons. what does everyone recommend?

Nasty C6

Do you plan on fly-cutting the pistons?

silverbullit2006

No. I just want a good performaning and sounding cam. Nothing to extreme just the normal things like springs ect..

Nasty C6

All the sponsors here have all that info,they know what the max efforts are.bet they chime in tomarrow.

silverbullit2006

Yea I'm hoping I wasn't expecting to much on a late Sunday night lol

LS2-Zomb!e

G6x3

Nightstalker Medic

Whiplash Cam from EnglandGreen.

0EG@EnglandGreen

^ Thanks Walter

silverbullit2006 - We might have something you may be interested in.

Check out our cam thread for dyno graphs, customer comments and driving impressions and videos.

http://forums.corvetteforum.com/c5-g...-new-cams.html

Thanks

Stephen

GregC6

here is my set up:
http://forums.corvetteforum.com/c6-t...ds-are-on.html
here is a very good thread to read about cams:
http://forums.corvetteforum.com/c6-t...right-now.html

seevi

If you're going to but a blower on your LS2, you should be looking for a cam that complements the blower. Do both mods at the same time for optimum performance.

silverbullit2006

thanks for all the replys....that wiplash cam is looking very promising.....

mittens

I was looking at the england cam, don't you guys use soem wierd lobs? that what you can have the big duration and lift but better drivability or soemthing?

how do these lobs were on the valve trian?

0EG@EnglandGreen

We use Comp Master lobes, same as everyone else that uses Comp Cams. Nothing weird. Ramp is very soft so we can tune our cams to close to stock driveability. Yes, we do use very big duration and lift is .630 inches

mittens

I am being told that some people use different lobs? like XR lobs, and a few other names but my mind is blank right now.

Nightstalker Medic

silverbullit2006, mittens the Whiplash cam is just wicked. It sounds wicked too

I love mine

silverbullit2006

^^ did you see a good hp gain to the wheels? worth your time and money?

0EG@EnglandGreen

Yes, Comp has several Master Lobes for the Gen III & Gen IV LS engines - XE, XE-R, LSK, and so on. You can mix and match the lobes to build the kind of cam characteristics and behavior you are trying to achieve.

Nightstalker Medic

With what I have in my Sig when I was at 7200ft in Colorado Springs. I was 444/404.

I'm looking for a tuner here in Maryland now that I'm back from my deployment. So, I will share the new dyno numbers when they come in.

The cam pulls like a freight train.

mittens

right would you mind telling me which kind of lobs? casue i am being told to stay away from certain ones.

silverbullit2006

nice, lets us know who you go to. I have the same problem, i live in delaware and havnt found anyone to good around here.