TVS Supercharger installed on LS3, Dyno tuning today!
#1
Racer
Thread Starter
Member Since: Aug 2008
Location: Marietta GA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
TVS Supercharger installed on LS3, Dyno tuning today!
As many of you already know we have installed and delivered quite a few TVS systems on LS7 Z06's with awesome results (860hp/760ft/lbs). You also probably already know that we also offer a bolt-on TVS supercharger kit for LS2 and LS3 powered C6's. What everyone doesn't know and what quite a few have said they are waiting for, is the amount of power that the TVS will produce on the C6. Well the wait is finally over. We finished our first LS3 TVS installation this morning and have begun tuning. Initial numbers look very promising but I'm gonna wait til the final numbers to post. We're gonna stay as long as it takes today to get some final power numbers so stay tuned, they'll be here today!
Here's a quick video we made earlier today when we began tuning. This was made before we had done much tuning so in the video we only rev the car to 4000 rpm's. (sorry about the finger in the corner of the shot too)
LS3 TVS Initial tuning video
Here's a quick video we made earlier today when we began tuning. This was made before we had done much tuning so in the video we only rev the car to 4000 rpm's. (sorry about the finger in the corner of the shot too)
LS3 TVS Initial tuning video
#3
Racer
Thread Starter
Member Since: Aug 2008
Location: Marietta GA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
#6
Melting Slicks
Will the #'s be from a bone stock LS3 w/ no other drivetrain modifications other than your sc package?
Will the kit come w/ a baseline tune & are #'s w/ that baseline tune?
Will the kit come w/ a baseline tune & are #'s w/ that baseline tune?
#7
Racer
Thread Starter
Member Since: Aug 2008
Location: Marietta GA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
The mail-order kit will come with a box and pre-paid ups label so that you can return your ecm to us. We will tune it according to the engine mods your car has and send it back. We tune our in-house installs with our chassis dyno and the numbers we post for this car will come from that type of tuning.
#9
Racer
Thread Starter
Member Since: Aug 2008
Location: Marietta GA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Dyno numbers
Tuning is complete and here are the power numbers. On a stock LS3 Corvette at 7.5lbs of boost the TVS produces 658hp (560rw) and 622ft/lbs of torque (528rw). These numbers represent a 195rwhp and 168rwft/lb gain over stock. The most impressive point to note on the graph is that at only 3000 rpms this car already has 500 ft/lbs of rear wheel torque. I think Frank, the owner, will be pleased!
#10
Burning Brakes
Great numbers.
Good luck with the release.
Good luck with the release.
Last edited by EVRGRN; 02-12-2009 at 08:31 PM.
#14
Race Director
I love it when a CAI with Headers is considered a bone stock motor. Nevertheless impressive numbers. Although I do wonder what the numbers would be on a REAL bone stock LS3? If I go with F/I it will be street legal.
#15
Team Owner
Member Since: Mar 2001
Location: Virginia Beach
Posts: 25,889
Likes: 0
Received 5 Likes
on
5 Posts
CI 3-5-6-7-8 Veteran
^ When you're putting a supercharger on leaving stock manifolds on makes no sense and you can't use the stock air intake due to the location of the intake snout off of the supercharger.
The engine is bone stock... meaning no forged bottom end w/ lower compression pistons. No ported heads and no cam etc etc.
If you wanted a very streetable package you could put on a full LS7 exhaust vs. headers etc.
The engine is bone stock... meaning no forged bottom end w/ lower compression pistons. No ported heads and no cam etc etc.
If you wanted a very streetable package you could put on a full LS7 exhaust vs. headers etc.
#16
Lifetime NCM Member #2497
Tuning is complete and here are the power numbers. On a stock LS3 Corvette at 7.5lbs of boost the TVS produces 658hp (560rw) and 622ft/lbs of torque (528rw). These numbers represent a 195rwhp and 168rwft/lb gain over stock. The most impressive point to note on the graph is that at only 3000 rpms this car already has 500 ft/lbs of rear wheel torque. I think Frank, the owner, will be pleased!
#20
Team Owner
Member Since: May 2001
Location: ...tearing up the highways, one state at a time™®©
Posts: 31,627
Received 2,103 Likes
on
1,075 Posts
Tuning is complete and here are the power numbers. On a stock LS3 Corvette at 7.5lbs of boost the TVS produces 658hp (560rw) and 622ft/lbs of torque (528rw). These numbers represent a 195rwhp and 168rwft/lb gain over stock. The most impressive point to note on the graph is that at only 3000 rpms this car already has 500 ft/lbs of rear wheel torque. I think Frank, the owner, will be pleased!