Spark plug wires for LT1 w/headers
02-06-2009, 01:03 PM
#1
Melting Slicks
Thread Starter
Member Since: Feb 2005
Location: Sebastian Florida
Posts: 2,135
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '06
Spark plug wires for LT1 w/headers
Need a set of wires with all 8 boots at 90 degrees, does anybody make a set?
Thanks!!
Thanks!!
02-06-2009, 03:19 PM
#4
Le Mans Master
Member Since: Aug 2004
Location: Metairie Louisiana
Posts: 5,141
Likes: 0
Received 4 Likes
on
4 Posts
I have the MSD's also, made for my year corvette. I burned though a couple of boots on my headers. They sell replacement boots. It was pretty easy to fix. It just takes a little cutting and crimping. They also sell universal sets like this that you can custom make. You can get 90* or straight plugs. They also sell the wire only in rolls. Check the MSD cataloge or web site. Summit has them also.
Something like this...
Something like this...
Last edited by rickneworleansla; 02-06-2009 at 03:25 PM.
02-06-2009, 03:59 PM
#6
Le Mans Master
Member Since: Aug 2004
Location: Metairie Louisiana
Posts: 5,141
Likes: 0
Received 4 Likes
on
4 Posts
I have some but they sent the straight ones not the 90 deg ones, half of them would not fit. After about an hour of trying to squeeze them on I realized this.
After that I hope I never have to touch another stupid boot protector. 
I know... If I would have just had the right ones. I found a way to just tie wrap the wires/plugs away from the headers which seems to be working for now.
