FS: 1970 LT1 3927186 big valve heads
#1
FS: 1970 LT1 3927186 big valve heads
1970 LT1 3927186 Camel Hump heads Date codes are D10 and D70
Heads have been completely reworked and tested. They were installed on my 406 short block but never fired. Just got them from my machinist today, they were removed to make room for new AFR195 heads. Pictures are posted below.
2.02/1.60 valves screw in studs, guide plates and 64cc combustion chambers. Hot tanked, magnafluxed, bead blasted, pocket ported, 3 angle valve job, new retainers, locks, springs, bronze guides, positive seals, o rings
Price is $750 OBO if you pay shipping $800 if I pay. I am located in upstate New York
2.02 / 1.60 valves
Springs, screw in studs, guideplates
Double hump markings
Date code #1
Date code #2
Formerly installed on this 406 short block - engine was never fired
Heads have been completely reworked and tested. They were installed on my 406 short block but never fired. Just got them from my machinist today, they were removed to make room for new AFR195 heads. Pictures are posted below.
2.02/1.60 valves screw in studs, guide plates and 64cc combustion chambers. Hot tanked, magnafluxed, bead blasted, pocket ported, 3 angle valve job, new retainers, locks, springs, bronze guides, positive seals, o rings
Price is $750 OBO if you pay shipping $800 if I pay. I am located in upstate New York
2.02 / 1.60 valves
Springs, screw in studs, guideplates
Double hump markings
Date code #1
Date code #2
Formerly installed on this 406 short block - engine was never fired
Last edited by myc3; 01-28-2009 at 10:26 AM. Reason: add pictures
#5
Safety Car
To the OP......I would go ebay w/them,bud.You'd have better luck there as the Camaro guys also,chase these.