Jimmy 2 Times

I got one for christmas, but am hesitant to use it. It looks good, but can't find any info on it.

Anyone have some insight?

goatts

Do a search. Tons of info on jacking the C6.

rhedrich

I have it and have been using for 6 month now with no problem. Work well and the price was good. I picked mine up at walmart.

Jimmy 2 Times

cool, I haven't even taken it out the box yet, it looks as if it is a low profile, you have any problems getting it under the vette?

thanks again

cheakster

Jimmy, I just recently used that jack (and stands) on my C6. It worked fine for side lifting (used jacking pucks made from hockey pucks) and rear lifting (may need a wood block for extra height). It is low profile and works well (the LED light was actually helpful), but is not nearly as long and does not raise as high as the more expensive jacks that many members will recommend. It's good for occaisional light tasks, but if you plan to lift the entire car often, there are better choices. $100 for 4 (good)stands and a decent low-profile jack isn't bad
Dan

TANGLVR

PLEASE PLEASE PLEASE only use the jack for the raising or lowering of the vehicle. ANY JACK!!!!

To maintain a raised vehicle use jack stands and wheel chocks for your safety. A car falling off a jack will kill you.

No jack should be used to suspend the car while performing work around or underneath it.

rdm1465

I agree, never use the jack to hold and maintain the vehicle up, always for safety sake, use jack stands.

rhedrich

Nope works great. I also have the matching jack stands that I use after I raised to the height need. Good product.

ATC399

I cant find any info reference this Jack onlne..Where do you buy it?

cheakster

Walmart
They also have two sizes of stands that work well

RLSebring

What wax would you recommend on it and also syn hydro oil?

larvette

Wax?

RLSebring

The way everything else gets waxed around here I figured the jack must be waxed as well and a debate on the best hydro oil to use in the jack.