Legendary Problem Solved....
#1
Instructor
Thread Starter
Legendary Problem Solved....
Must be Xmas time. I figured out the issue with the famous key fob problem of it loosing sync with the cars. Turns out it's a problem with one of the chips coming detached from the circuit board.
When you open the key fob with the board facing you, look near the top right hand corner. There's a rectangle shaped chip, check the prongs. I checked mines both times when each of my remotes wouldn't keep sync with the car, each time it was loose.
I resolder it or you can even use permanent glue between the chip & board to hold it firm if you're not comfortable with soldering. Make sure the prongs have a good connection. Sorry that I haven't taken any pics, but it's pretty much straight forward.
Yeah, I know my atar is big, but I put it in at normal size & it keeps blowing up to the huge size. Yeah, I've resized it, lower resolution. I'll play with it some more later when time permits.
When you open the key fob with the board facing you, look near the top right hand corner. There's a rectangle shaped chip, check the prongs. I checked mines both times when each of my remotes wouldn't keep sync with the car, each time it was loose.
I resolder it or you can even use permanent glue between the chip & board to hold it firm if you're not comfortable with soldering. Make sure the prongs have a good connection. Sorry that I haven't taken any pics, but it's pretty much straight forward.
Yeah, I know my atar is big, but I put it in at normal size & it keeps blowing up to the huge size. Yeah, I've resized it, lower resolution. I'll play with it some more later when time permits.
The following 4 users liked this post by C599:
ArmchairArchitect (05-18-2017),
El original (11-15-2016),
jlaw1313@comcast.net (05-31-2017),
Zo&Shel (10-17-2016)
#2
Melting Slicks
That would make sense... I just took mine apart and studied the circuit. It appears that one of the battery (+) legs goes up to the two legs on that chip, through the chip, then down to two pins on the main chip.
Maybe that is a memory feature of some kind? I think the FOB's have a rolling code, so maybe this is what keeps track of the codes as it rolls over?!?!
I just took my FOB down to the lab and hit those points with some solder. If it works, I'll report back.
Thanks for the tip.
Mark
Maybe that is a memory feature of some kind? I think the FOB's have a rolling code, so maybe this is what keeps track of the codes as it rolls over?!?!
I just took my FOB down to the lab and hit those points with some solder. If it works, I'll report back.
Thanks for the tip.
Mark
The following users liked this post:
mrmojo37 (07-12-2023)
#4
Melting Slicks
I took a picture of the FOB and the six points that that I re-soldered. The points are marked with red dots.
You need a small tipped iron to get down on those points... but it's better than buying a new FOB.
Mark
You need a small tipped iron to get down on those points... but it's better than buying a new FOB.
Mark
Last edited by Fasthotrod; 01-21-2009 at 12:24 AM.
#6
Cool info
Guys Thanks
I just bought a 2000 coupe key fob never worked. I will check when I get home this week
Chuck
I just bought a 2000 coupe key fob never worked. I will check when I get home this week
Chuck
The following users liked this post:
slammer46 (05-13-2016)
#9
Team Owner
XLNT! It just goes to show you that you learn something new every day
Thanks,Matt
Thanks,Matt
#13
Burning Brakes
Member Since: Sep 2003
Location: Broken Arrow OK
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
This really works.
I had been having problems with my 1999 fob for some time. Replaced the battery and still no improvement. About every day I had to resync the fob in order to get it to work. After reading this post, I opened the fob and examined the chip connections but could not see that they were actually loose. Some days later I decided to go ahead and try the repair described in this post. The fob now works perfectly. Not only does it retain sync, but even the slightest tap of the fob buttons brings an instant response. If you are experiencing problems with your older key fob, give this a try.
#15
Le Mans Master
This needs to be a sticky,,,right along with the dim/dark HVAC display fix!! Have to remember this one too!! I have so many bookmarks now that I can't find the ones I looking for now!!
The following users liked this post:
joelschl (07-19-2020)
#17
Moderator Emeritus
Member Since: Apr 2002
Location: Always living in a state of Confusion.
Posts: 54,756
Likes: 0
Received 0 Likes
on
0 Posts
Gone, but not Forgotten
Cruise-In 5, 6, 8 & 10 Veteran
St. Jude '03-'04-'05-'06-'07-'08-'09
No way in hell could I solder that. I don't have the steadiest of hands.
#19
Burning Brakes
Member Since: Sep 2003
Location: Broken Arrow OK
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
It's actually quite easy. It took me about 2 minutes to do it. It is easier if you first remove the rubber gasket surrounding the circuit board. Just use a sharp tip soldering iron and barely wet the tip with fresh solder before touching the 4 chip connection point.
#20
Melting Slicks
Would the glue actually work the same or is it way better to solder it?
Thanks so much!
Just curious because a super glue tip is perfect for that tight spot...
Donnie
Thanks so much!
Just curious because a super glue tip is perfect for that tight spot...
Donnie