Diablosport & Halltech or Vararam CAI Package - 2008 C6 Corvette LS3/LS7
08-15-2008, 11:52 AM
#1
Former Vendor
Thread Starter
Diablosport & Halltech or Vararam CAI Package - 2008 C6 Corvette LS3/LS7
You guys asked for this package so here it is
Standard you get a DiabloSport Predator U7194 Predator (which now has 08 support) along with a Halltech Killer Bee AAIS - 2008 Chevy Corvette LS3 (Black)
All for 689.95 + Shipping!
http://marylandspeed.com/diablosport...03-p-1601.html
You also have the following intake options-
Vararam Snake Charmer Cold Air Intake - 2005-2008 Corvette & Z06 (LS3 & LS7 Engines)
Halltech Killer Bee AAIS - 2006-2008 Chevy Corvette Z06 LS7 (Red)
Halltech Killer Bee AAIS - 2006-2008 Chevy Corvette Z06 LS7 (Black) - $74.95 More
Halltech Killer Beehive Ram Air Pak - 2006-2009 Corvette & Z06 (LS3 & LS7 Engines) - $99.95 More
Again, you can order on our website here-
http://marylandspeed.com/diablosport...03-p-1601.html
Standard you get a DiabloSport Predator U7194 Predator (which now has 08 support) along with a Halltech Killer Bee AAIS - 2008 Chevy Corvette LS3 (Black)
All for 689.95 + Shipping!
http://marylandspeed.com/diablosport...03-p-1601.html
You also have the following intake options-
Vararam Snake Charmer Cold Air Intake - 2005-2008 Corvette & Z06 (LS3 & LS7 Engines)
Halltech Killer Bee AAIS - 2006-2008 Chevy Corvette Z06 LS7 (Red)
Halltech Killer Bee AAIS - 2006-2008 Chevy Corvette Z06 LS7 (Black) - $74.95 More
Halltech Killer Beehive Ram Air Pak - 2006-2009 Corvette & Z06 (LS3 & LS7 Engines) - $99.95 More
Again, you can order on our website here-
http://marylandspeed.com/diablosport...03-p-1601.html
08-23-2008, 03:40 PM
#8
Drifting
just ordered the MS combo Predator/Halltech (black)/Beehive/interface for my 2008 Corvette A6 full report soon.
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
08-23-2008, 06:21 PM
#9
Drifting
just ordered the MS combo Predator/Halltech (black)/Beehive/interface for my 2008 Corvette A6 full report soon.
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
two questions do i need the 160 degree thermostat with this combo and i currently have the Vette Air scoop installed will i still be able to use the VA with the Beehive?
thanks bosco
08-26-2008, 06:02 PM
#11
Former Vendor
Member Since: Jun 2008
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Sorry about the wait... we weren't on the forum much over the weekend and we came back to a very busy day yesterday. Just saw your post and no you do not NEED the 160 degree thermostat for anything, but we recommend the thermostat regardless of other mods. These LSx motors can get heat soaked pretty badly and anything that can be done to keep the coolant/engine/engine bay temps down should be done in our opinion.
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
08-26-2008, 06:57 PM
#12
Drifting
Sorry about the wait... we weren't on the forum much over the weekend and we came back to a very busy day yesterday. Just saw your post and no you do not NEED the 160 degree thermostat for anything, but we recommend the thermostat regardless of other mods. These LSx motors can get heat soaked pretty badly and anything that can be done to keep the coolant/engine/engine bay temps down should be done in our opinion.
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
If you get the thermostat in the future you'll want to use your Predator to lower the temps that your cooling fans kick on to get full benefit from the new thermostat. Hope that answers your question. Thanks!!
btw received the Halltech/Beehive part of my order today and it was missing the hood seal
pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
08-27-2008, 03:41 PM
#14
Former Vendor
Member Since: Jun 2008
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
thanks i'll install one soon.
btw received the Halltech/Beehive part of my order today and it was missing the hood seal pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
btw received the Halltech/Beehive part of my order today and it was missing the hood seal
pm'd MS and shortly thereafter Branden replied he would look into it a couple of hours later i get a call on my cell from Jim Hall the owner of Halltech he said he would send one soon. tomorrow the Predator is to be delivered so far so good. thanks to Maryland Speed for all your help.
Let us know how you like the Halltech and Predator combo once you get everything!No specific reason other than it being difficult to offer a package for every intake available together with the Predator. Sometimes we stick to offering what we think will be the more popular choices, but give us a call and we can do something for you on the two items that you're looking at. 443-730-9428
08-28-2008, 09:35 PM
#15
Drifting
then to add to my day i only got to drive it for a couple of miles before the rain came. car seems fine idles well and drives like stock. Maryland Speed gets the bosco seal of approval for cost, speed of delivery and customer service will use them again when the time comes. thank youBranden is talking me into headers.
08-29-2008, 07:44 AM
#16
Former Vendor
Member Since: Jun 2008
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
update: received the hood seal, well done. i had some problems with the Predator install because of my poor computer skillz that ended up being my fault (needed update) but after a couple of e-mails and a phone call from Branden i got it going. then to add to my day i only got to drive it for a couple of miles before the rain came. car seems fine idles well and drives like stock. Maryland Speed gets the bosco seal of approval for cost, speed of delivery and customer service will use them again when the time comes. thank you
Branden is talking me into headers.
then to add to my day i only got to drive it for a couple of miles before the rain came. car seems fine idles well and drives like stock. Maryland Speed gets the bosco seal of approval for cost, speed of delivery and customer service will use them again when the time comes. thank youBranden is talking me into headers.
