jamsvet

I was able to purchase a C6 hood for a great price and I would like to put louvers in it to provide better cooling for track days. I would be switching the hood for the track and putting the stock one back on afterwards.
Several questions: What is the hood made of? Does anyone make a set of louvers that would be compatible with the hood? I'm ASSuming that the stock hood is the same as the Z06 hood. (Is it?)

2SINISTER

I'm almost positive the C6 and Z06 hoods are identical. As for adding the louvers, I don't know. I would think it could be done, but I don't know if it would end up being worth it. To switch hoods any time you were going to go to the track could get to be a headache when it came time to lining them up and making sure the hood is on right. Just my $0.02.

AU N EGL

Stock hood is fiberglass composite. Z06 hood is carbon fiber IIRC - PIA to change unless both hoods are set up with hood pins and not the spring loaded hinges that are currently in place

Do a search over in the autocross and road race forum. We had a discussion about hood louvers a while a go

Pat Salerno

Actually the C6 ZO6 hood is not carbon fiber ( have on in my garage) ....it is identical to the standard C6 hood (also have one in my garage).
Only the 04 ZO6 special edition hood was carbon fiber.
Pat

0David_Yu

Does anyone make a CF louvered hood that is naked CF, i.e. shows the weave?

0Anthony @ LGMotorsports

David,

Check your PM's.


We can do a bare carbon hood, but they are very limited.

0David_Yu

Thanks Anthony!

eeagle

Also, I think Jason of Katech has a 'naked' cf hood on his red Z06 - hood looks black.

Katech_Zach

Yes, but ACP didn't want to make any more until they get a proper autoclave.

ProgGod

When is that suppose to be?

Tavarez

ACP hoods = badarse.

Katech_Zach

You would have to ask them. Tell him you saw Jason's hood and want that. If enough people say it maybe they will take that into account.

1stZ

I did exactly that but they're unwilling to do a "whole CF". At the moment, they're only willing to do "part" & not whole. Just got mine & currently getting painted. Will post as soon as it is ready.

kentz06

Yep!





Painted CF.

Dean

0Anthony @ LGMotorsports

The factory hood is a resin composite, the only factory carbon hoods were the 2004 C.E. Z06 and of course the new ZR1.

We do have a 'glass insert that you can cut to fit and put a center section of louvers into your hood. The piece itself is $395.

0David_Yu

That looks great Dean!

Are there any issues with water/dust/debris being thrown through the louvers?

What about rainwater ingress?