rear fender flares
01-19-2008, 06:04 PM
#2
Instructor
Member Since: Sep 2006
Location: lockport IL
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
01-19-2008, 06:56 PM
#4
Advanced
Member Since: Aug 2006
Location: Bellingham Washington
Posts: 88
Likes: 0
Received 2 Likes
on
1 Post
I just modified a set of C6 Z06 factory flares to fit my C5. I don't have a picture but the application was so sweet!!! Do a search in the general section under C6 fender. 
01-20-2008, 12:16 AM
#5
Le Mans Master
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
ACP Corvette, otherwise know as Corvette Race Bodies. They make pieces that Lou G has used on his World Challenge Corvettes that cover the entire rear wheel. These are truly race inspired for proper aerodynamics much like the C5R & C6R pieces. All Business, available in Carbon Fiber as well
http://www.corvetteracebodies.com/wo...ice%20list.htm
http://www.corvetteracebodies.com/wo...ice%20list.htm
01-20-2008, 07:52 AM
#7
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 24 Likes
on
24 Posts
I have the 3/4" flared ACP fenders and SPWCGT rear facia with molded 1" spoiler.
I run 18x13" rims ( 3/8" spacer on longer ARP studs) with 18x335/30 Hoosiers. Tires are almost 14" side wall to side wall.
10-17-2008, 04:40 PM
#9
2nd Gear
Member Since: Mar 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
10-17-2008, 05:55 PM
#10
12-14-2008, 06:57 AM
#12
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,193
Received 3,241 Likes
on
1,664 Posts
aftermarket ones do not have to be modified. the down side is they cost about $200 w/o shipping.
12-14-2008, 07:32 AM
#13
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 24 Likes
on
24 Posts
aftermarket ones do not have to be modified. the down side is they cost about $200 w/o shipping.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
12-14-2008, 10:26 AM
#14
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,193
Received 3,241 Likes
on
1,664 Posts
OEM fenders are much more expesive then that.
When I did my fender flairs I think the ACP ones were less expesive then the OEM fenders. Not by much but $20 or so.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
When I did my fender flairs I think the ACP ones were less expesive then the OEM fenders. Not by much but $20 or so.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
05-15-2009, 11:48 AM
#15
Racer
Member Since: May 2006
Location: Houston TX
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
05-15-2009, 12:24 PM
#16
Race Director
06-11-2009, 10:20 PM
#17
Le Mans Master
06-12-2009, 02:19 AM
#18
Le Mans Master
APSIS Splash Guards - about $100 each...
06-12-2009, 04:33 AM
#19
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,193
Received 3,241 Likes
on
1,664 Posts
