Rotors without rust? Recommendations?
#1
Drifting
Thread Starter
Member Since: Aug 2006
Location: Florida
Posts: 1,719
Received 0 Likes
on
0 Posts
St. Jude Donor '07
Rotors without rust? Recommendations?
Rotors without rust? Recommendations? After I wash my car the rust drips from the brake rotors and makes a rusty mess in the center of my wheels. I am planning to replace my rotors. What is recommended that will not drip rust?
#3
Safety Car
You can either paint the hats or get zinc coated rotors.
#4
Race Director
Member Since: Jan 2003
Location: Houston, Tx Got traction?
Posts: 14,285
Likes: 0
Received 0 Likes
on
0 Posts
CI 5-6-7-8-9-10 Veteran
St. Jude Donor '07-'08
Buy a cheap set of napa rotors and paint them with some high temp paint before installing them.
#5
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,647
Received 19,204 Likes
on
13,921 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I have a set of Baer Eradispeeds on mine and they are zinc coated - been there for around 3 years and no rust. Sportbrakes makes a set of zinc coated rotors that are less expensive than the Baers if you don't want to spend that much. Finally, you can always paint the hats and vents on your existing rotors with a good quality paint and stop the rust.
#6
Pro
You have three options:
1. Buy zinc coated rotors
2. Paint the hats with a high-temp paint
3. Get the hat covers like Ecklers sells. They have chrome, painted, or unpainted. If you go this route, I highly recommend that you treat the surface of the rotor hats with a metal rust inhibitor first, otherwise they will rust beneath the hat covers. Don't use the rust inhibitor on the area that the pads contact because most of those products change the color of the metal to a grayish black.
1. Buy zinc coated rotors
2. Paint the hats with a high-temp paint
3. Get the hat covers like Ecklers sells. They have chrome, painted, or unpainted. If you go this route, I highly recommend that you treat the surface of the rotor hats with a metal rust inhibitor first, otherwise they will rust beneath the hat covers. Don't use the rust inhibitor on the area that the pads contact because most of those products change the color of the metal to a grayish black.
#8
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,255
Received 1,673 Likes
on
1,296 Posts
C6 of Year Finalist (appearance mods) 2019
Zinc dipped is the key!
#9
Racer
A cheap solution
I painted the hats on my rotors with high temperature paint ($12.00 for two cans of Duplicolor). Then, each time I wash my FRC, I dry it and buff it as normal, wipe down the engine compartment, buff my chrome wheels, then take her for a short spin applying the brakes frequently, not hard just touching. Heats up the rotors a little, water evaporates, whisks away any surface rust on rotors. Takes 5 minutes. Put her in the garage. No rust issues. Just a suggestion. Only costs the cost of 1 mile of gas.
#10
Burning Brakes
Member Since: Oct 2003
Location: Foresters Falls(near Ottawa) Ont
Posts: 1,106
Likes: 0
Received 1 Like
on
1 Post
My suggestion is paint the hats with a good high gloss black enamel. Doesn't have to be high temp paint, hats don't get that hot on a street driver.
Cheap, easy, looks good, won't rust. What more can I say!
RonJ ...
Cheap, easy, looks good, won't rust. What more can I say!
RonJ ...
#11
Race Director
Member Since: Jan 2003
Location: Houston, Tx Got traction?
Posts: 14,285
Likes: 0
Received 0 Likes
on
0 Posts
CI 5-6-7-8-9-10 Veteran
St. Jude Donor '07-'08
Not that hot?! Go for a drive and put your hand on your rotor
#13
Burning Brakes
#19
Burning Brakes