Fluidampr for TPI's / SBC's
12-26-2006, 07:31 AM
#1
Drifting
Thread Starter
Member Since: Jul 2004
Location: Raleigh N.C.
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
Fluidampr for TPI's / SBC's
Got a NIB Streetdampr from Vibratech, the folks that make Fluidamprs. Its p/n 716242-001, Chevy small block 6-3/4" O.D. internal balanced. It was originally bought for a TPI motor. Sold the car before the install and it's been in the garage since.
Wanting $120.00 Shipped, this is kinda heavy considering it's a balancer.
Don't know if this will work, but here's a link to Jegs.
http://www.jegs.com/webapp/wcs/stor..._15397_-1_10179
If it doesn't work go to their home site, look at engine components, then balancers and you'll see Fluidampr. They sell for $179.00 plus shipping.
This will not fit LS1 or LT1 motors. If you would like pics, leave your e-mail, but it's still in the box, unopened.
Thanks for looking.
Wanting $120.00 Shipped, this is kinda heavy considering it's a balancer.
Don't know if this will work, but here's a link to Jegs.
http://www.jegs.com/webapp/wcs/stor..._15397_-1_10179
If it doesn't work go to their home site, look at engine components, then balancers and you'll see Fluidampr. They sell for $179.00 plus shipping.
This will not fit LS1 or LT1 motors. If you would like pics, leave your e-mail, but it's still in the box, unopened.
Thanks for looking.
12-26-2006, 05:28 PM
#2
Intermediate
Member Since: Nov 2006
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
