TB Bypass
#1
Burning Brakes
Thread Starter
Member Since: Oct 2006
Location: Tempe, AZ Crown Point, IN
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
TB Bypass
I have the necessary parts just wondering which tubes to connect. I did this mod to my Camaro SS and I'm assuming its the same. Having a hard time locating the tubes. Does anyone have pictures of an install?
#4
Burning Brakes
Originally Posted by SunDevil C5
when i disconnected the tube from the lower left, coolant POURED OUT when i started it and didn't stop.
#5
Burning Brakes
Thread Starter
Member Since: Oct 2006
Location: Tempe, AZ Crown Point, IN
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Blue02ws6
Just put in the bypass as fast as you can, clean up the mess and check the coolant level.
#6
Burning Brakes
Originally Posted by SunDevil C5
The coolant wasn't coming from the hose. It was coming from somewhere else below the TB.
#7
Team Owner
Trick is to pull the one coming from the radiator first, then hold it up in the air so it won't leak (tie with string or something. Then get the bottom one off and start your connections. Put in some rags or something to keep coolant off the belt.
#9
Burning Brakes
Thread Starter
Member Since: Oct 2006
Location: Tempe, AZ Crown Point, IN
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Neil Baker
What does this TB by pass do???How is it Better??