Ignition Points Adjustment Tool
#2
Melting Slicks
For a stock distributor you need a flat head screwdriver to adjust the points mount and a 1/8" allen wrench to adjust the dwell. You also need a dwell meter (set to about 30º) unless you want to use a points gap gauge (set to .019"). All of these tools are available at almost any parts store.
#5
Team Owner
Originally Posted by Tom Johnson
What I am looking for is a long flexible shaft screw driver with a 1/8" allen head on the end.
I never knew such a thing existed. Is there any advantage over a regular little L-shaped allen wrench?
#6
Instructor
Member Since: Mar 2006
Location: Cumming GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Nice thing about the flex driver is, you can set it in there and know your not gonna get a shock. (btw, remember to re-check your timing once you have done the points)
#7
Instructor
Member Since: Apr 2006
Location: New Jersey
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tom Johnson
Where can I purchase an ignition points adjustment tool?
http://www.kd-tools.com/2539.htm
#8
Melting Slicks
Originally Posted by PRNDL
I never knew such a thing existed. Is there any advantage over a regular little L-shaped allen wrench?
#9
Drifting
Originally Posted by mirrorfinishman
Here is the one I have got. Of course, like AJ Foyt would say, mine was handed down from my father to me.
http://www.kd-tools.com/2539.htm
http://www.kd-tools.com/2539.htm
Bill
#10
Le Mans Master
i would be carefull giving these tools away,100 years from now they will be worth a lot of cash on e-bay . even better if they had been used on vettes, hahahah