Build sheet location
#1
Burning Brakes
Thread Starter
Build sheet location
can someone tell me where i can find my build sheet on my 04? i read someplace in here that its found in the front re-bar??? what would that be ?,, thanks rj
#3
Le Mans Master
Originally Posted by purrvert
Check your glovebox.
redjetty,
The build sheet is a folded printer sheet in the front crossmember frame rail (which is a hollow boxed member). I think the only way you can get to it is by removing the front fascia. An easier way to obtain one (albeit not "original") is to order one from the NCM.
#4
Drifting
Member Since: Oct 2004
Location: Southwest Virginia
Posts: 1,383
Likes: 0
Received 6 Likes
on
6 Posts
Originally Posted by wamara
What you are referring to in the glovebox is NOT the build sheet.
redjetty,
The build sheet is a folded printer sheet in the front crossmember frame rail (which is a hollow boxed member). I think the only way you can get to it is by removing the front fascia. An easier way to obtain one (albeit not "original") is to order one from the NCM.
redjetty,
The build sheet is a folded printer sheet in the front crossmember frame rail (which is a hollow boxed member). I think the only way you can get to it is by removing the front fascia. An easier way to obtain one (albeit not "original") is to order one from the NCM.
You are correct, you have to remove the front fascia (bumper cover) and the front bumper (foam pad) then you reach in the end of the front impact bar (front frame cross section) and pull out the sheet.
Anyone know how much the NCM charges for the sheet?
#6
Le Mans Master
Originally Posted by SpeedyZ
You are correct, you have to remove the front fascia (bumper cover) and the front bumper (foam pad) then you reach in the end of the front impact bar (front frame cross section) and pull out the sheet.
Anyone know how much the NCM charges for the sheet?
Good luck... GUSTO
#8
Le Mans Master
Member Since: Sep 2003
Location: Farmington CT
Posts: 6,126
Received 160 Likes
on
125 Posts
Cruise-In VII Veteran
here ya go, if you are local i'll help you remove the build sheet(takes about an hour)
http://forums.corvetteforum.com/show...highlight=ncrs
http://forums.corvetteforum.com/show...highlight=ncrs