Oil Filters for the LS1
#1
Racer
Thread Starter
Member Since: Dec 2002
Location: Virginia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Oil Filters for the LS1
Anyone here use Baldwin Oil Filters? ...they are supposed to be top notch, well made, and excellent. Size for the LS1 is a B31.
#2
Racer
Howdy, Peter!
I've been using the Baldwin B31 for a year or two. I noticed a small increase in oil pressure (on the gauge) across the board when I switched from the UPF to the Baldwin. The Baldwin appears to be a little less restrictive.
I have my oil analyzed yearly. Haven't noticed anything really different. All in all, I am quite satisfied with the Baldwin.
I've been using the Baldwin B31 for a year or two. I noticed a small increase in oil pressure (on the gauge) across the board when I switched from the UPF to the Baldwin. The Baldwin appears to be a little less restrictive.
I have my oil analyzed yearly. Haven't noticed anything really different. All in all, I am quite satisfied with the Baldwin.
#5
Drifting
Member Since: Jun 2002
Location: Iowa
Posts: 1,847
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In IV Veteran
Cruise-In V Veteran
Originally Posted by chriswtx
I like the NAPA Gold oil filters. They are made by WIX and are top notch...
AND the price is right, too.
#9
Race Director
I'm very happy with the results I've gotten with the K&N oil filter. This filter combined with German Castrol 0w30 has given me the lowest engine wear of any LS1 (according to oil analysis results I've gotten compared to any others I've seen posted on the net anywhere, nobody else has come close to my numbers)
As an example, here is a sample of my engine wear numbers on my last interval, which was 8000 miles:
Iron-9
Lead-4
Aluminum-3
Copper-3
Chromium-0
Nickel-0
Tin-0
Silver-0
I know that the high flow ability of the K&N oil filter is partially responsible for my low wear numbers. In hard driven applications, high flow is more critical than super fine filtering ability.
As an example, here is a sample of my engine wear numbers on my last interval, which was 8000 miles:
Iron-9
Lead-4
Aluminum-3
Copper-3
Chromium-0
Nickel-0
Tin-0
Silver-0
I know that the high flow ability of the K&N oil filter is partially responsible for my low wear numbers. In hard driven applications, high flow is more critical than super fine filtering ability.
#10
Drifting
I use Purolator PremiumPlus filters. Highest flow rating with best filtration combined. Read tests here:
www.oilfilterstudy.com
Take a look at the link to the Grease oil filter study spreadsheet to see media flow rates and filtration efficiency.
The filters in this test are the old style SB Chevy filters used on Mercruiser stern drive engines (Basically all Chevy SB engines. I have a 260HP 5.0 MPI in my 24 ft. express cruiser), but the flow and filtrations rates are similar all filters since the same materials are used, so the comparison is valid.
I also use a tall filter even though it sticks out a couple of inches below the oil pan.
www.oilfilterstudy.com
Take a look at the link to the Grease oil filter study spreadsheet to see media flow rates and filtration efficiency.
The filters in this test are the old style SB Chevy filters used on Mercruiser stern drive engines (Basically all Chevy SB engines. I have a 260HP 5.0 MPI in my 24 ft. express cruiser), but the flow and filtrations rates are similar all filters since the same materials are used, so the comparison is valid.
I also use a tall filter even though it sticks out a couple of inches below the oil pan.
Last edited by Alex D; 01-01-2006 at 09:03 PM.
#14
Melting Slicks
I use Baldwin B31s exclusively. Buy 'em by the case here.
The OEM filters are fine, but they were designed for the lowest common denominator -- the type of person who never changes the oil unless the car happens to be in for some other service. IOW... excellent, long-lasting filtration properties, but not so good flow characteristics. For the typical enthusiast (i.e., the type of person who hangs out here), there are better-flowing choices, primarily the K&N and Baldwin as mentioned by Dave68.
The oil study results (see link provided by Alex D) figured heavily in my decision. Even with benefit of this study though, it still comes down to personal recommendation and preference IMO. Reason being, that the oil study does not define terms such as "average," above average" or "good." Without knowledge of the "average" result (is it good, great, or lousy?), it's difficult to know with certainty which ones are quantitatively superior.
The OEM filters are fine, but they were designed for the lowest common denominator -- the type of person who never changes the oil unless the car happens to be in for some other service. IOW... excellent, long-lasting filtration properties, but not so good flow characteristics. For the typical enthusiast (i.e., the type of person who hangs out here), there are better-flowing choices, primarily the K&N and Baldwin as mentioned by Dave68.
The oil study results (see link provided by Alex D) figured heavily in my decision. Even with benefit of this study though, it still comes down to personal recommendation and preference IMO. Reason being, that the oil study does not define terms such as "average," above average" or "good." Without knowledge of the "average" result (is it good, great, or lousy?), it's difficult to know with certainty which ones are quantitatively superior.
#16
Racer
Thread Starter
Member Since: Dec 2002
Location: Virginia
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mr. Lucky
I use Baldwin B31s exclusively. Buy 'em by the case here.
The OEM filters are fine, but they were designed for the lowest common denominator -- the type of person who never changes the oil unless the car happens to be in for some other service. IOW... excellent, long-lasting filtration properties, but not so good flow characteristics. For the typical enthusiast (i.e., the type of person who hangs out here), there are better-flowing choices, primarily the K&N and Baldwin as mentioned by Dave68.
The oil study results (see link provided by Alex D) figured heavily in my decision. Even with benefit of this study though, it still comes down to personal recommendation and preference IMO. Reason being, that the oil study does not define terms such as "average," above average" or "good." Without knowledge of the "average" result (is it good, great, or lousy?), it's difficult to know with certainty which ones are quantitatively superior.
The OEM filters are fine, but they were designed for the lowest common denominator -- the type of person who never changes the oil unless the car happens to be in for some other service. IOW... excellent, long-lasting filtration properties, but not so good flow characteristics. For the typical enthusiast (i.e., the type of person who hangs out here), there are better-flowing choices, primarily the K&N and Baldwin as mentioned by Dave68.
The oil study results (see link provided by Alex D) figured heavily in my decision. Even with benefit of this study though, it still comes down to personal recommendation and preference IMO. Reason being, that the oil study does not define terms such as "average," above average" or "good." Without knowledge of the "average" result (is it good, great, or lousy?), it's difficult to know with certainty which ones are quantitatively superior.
Anyone know what size wrench cap will fit on the B31 to take it off?
#17
Originally Posted by Alex D
I also use a tall filter even though it sticks out a couple of inches below the oil pan.
NVG.
Be careful with that long filter.