DART PRO 1 flow numbers???
#1
Instructor
Thread Starter
Member Since: Aug 2005
Location: Nipomo CA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
DART PRO 1 flow numbers???
im looking into purchasing a 180cc set of heads and was unable to find the Dart Pro 1 heads flow charts for "out of the box" no addition CNC'ing.
can someone chime in on what they flow and the in/ex. flow ratios please?
thanks, Fancyazz
can someone chime in on what they flow and the in/ex. flow ratios please?
thanks, Fancyazz
#2
Advanced
You can get some flow numbers right from Dart's web site. For instance: http://www.dartheads.com/manager/upl...PRO1%20SBC.pdf (The 180 page appears to currently be down, but it seems to me that it was working not very long ago when I bought my Dart heads.). These are for unmodified heads directly from them. When I was shopping, I believe I also got additional flow numbers by calling and talking directly to them. By the way, I thought this was a good reference when i was shopping for heads: http://www.chevyhiperformance.com/techarticles/41598/
Good luck!
Good luck!
#3
Advanced
By the way, I bought my Dart Heads from Yoder's Performance Engines on Ebay. I felt I got a good deal from him. I bet he could give you more flow numbers too. I talked to Russ and he was very easy to work with. When I got my polylocks, I had (1) 7/16" polylock instead of 3/8" and he resolved by overnighting the right one. I wouldn't hesitate to do further business with him. Search for dart pro heads on ebay and you'll find him. He can customize the package too as I needed to get upgraded springs to accomodate the 0.560 lift of my setup.
Last edited by Aidoneus; 09-03-2005 at 10:45 PM. Reason: Additional information
#4
Instructor
Thread Starter
Member Since: Aug 2005
Location: Nipomo CA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
thanks! i got to see the flow numbers for the 200cc heads. a bit big for the motor i intend to build but at least i see they are definately in the ball park for a 195AFR and flow a bit better than 195TFS heads. not much...just a tad.
#5
Racer
Originally Posted by Aidoneus
By the way, I bought my Dart Heads from Yoder's Performance Engines on Ebay. I felt I got a good deal from him. I bet he could give you more flow numbers too. I talked to Russ and he was very easy to work with. When I got my polylocks, I had (1) 7/16" polylock instead of 3/8" and he resolved by overnighting the right one. I wouldn't hesitate to do further business with him. Search for dart pro heads on ebay and you'll find him. He can customize the package too as I needed to get upgraded springs to accomodate the 0.560 lift of my setup.
have to wait till winter.
Dave