Rconce01

Guys,

Need a little help diagnosing this recently my belt snaped and made a huge wipping noise and i noticed it wacked the abs connection right under the crank drive pully, this caused the abs and tcs lights to turn on and two codes to pop up c1221 and c1232. Any idea on what can be causing this.

Thanks,
Ralph

PA_BLUE_C6

Sounds like the BPMV module is not getting 12 volts. I am not home to look up your codes and I have a 2000 so codes maybe be different. That thing with six brake lines going to it is the heart and soul of abs and tcs. When I get home I will look up those codes for you.
Noe

Rconce01

Greatly Appriciate It, This Thing With No Abs Or Traction Control In The Rain Can Get Pretty Intimidating.

DidntSettle

C1221 LF Wheel Speed Sensor Input Signal is 0
C1232 LF Wheel Speed Circuit Open or Shorted

Richin Chicago

It's the left front wheel speed sensor not "reporting" to the CPU. Check the connection at wheel bearing. (Shown below) and then check the connection at the other end of the harness. If you aren't sure what is going on switch the wiring harnesses around and see if it moves the problem to the other side. You can your error codes at:
http://member.newsguy.com/~rmoburg/j...%20Bearing.jpg

Rconce01

How Do I Check The Connection Visually Or With A Voltmeter?

PA_BLUE_C6

Since the belt tapped the connector a quick look might show you what is damaged. Do the easy things first. GOOD LUCK!!!

Rconce01

Will Do

Thanks

Rconce01

Visual inspection indicates everything is good nothing broken or damaged and now there is a new code c1225 it seems the rf tire has joined the problem.