Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[Z06] Aluminum Frame Problems for us Northern Folk...

Thread Tools
 
Search this Thread
 
Old 01-01-2005, 09:26 PM
  #1  
YukonCornelius
Instructor
Thread Starter
 
YukonCornelius's Avatar
 
Member Since: Aug 2004
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
Default Aluminum Frame Problems for us Northern Folk...

Okay, I need an aluminum expert to tell me that it is in fact fdifferent... Now, I only drive my current Z in fair weather, however, occasionaly late fall, even well into the winter, we get som 60+ degree weather - and the Vette NEEDS to come out to play. I know how road salt eats aluminum... So if I go this route, my driving days become a mere 6 month window here in the north- assumning this aluminum frame has the same properties as, well, your everyday aluminum...
Old 01-01-2005, 09:41 PM
  #2  
usroute66 MKW
Pro
 
usroute66 MKW's Avatar
 
Member Since: Apr 2002
Location: CA
Posts: 693
Likes: 0
Received 1 Like on 1 Post

Default

Audi's all weather AWD A8 has been all aluminum space frame for 7 years, as is the new Jag XJ and Ferrari 360/F430 and 612.
Old 01-01-2005, 09:45 PM
  #3  
ivan111
Drifting
 
ivan111's Avatar
 
Member Since: Mar 2003
Location: Carolina
Posts: 1,569
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by usroute66 MKW
Audi's all weather AWD A8 has been all aluminum space frame for 7 years, as is the new Jag XJ and Ferrari 360/F430 and 612.
Add to this list the Ford GT, Lambo Gallardo and the Acura NSX which appeared way back in 1990......
Old 01-01-2005, 09:46 PM
  #4  
Mighty-Mouse
Burning Brakes
 
Mighty-Mouse's Avatar
 
Member Since: Dec 2004
Location: New Jersey
Posts: 1,234
Likes: 0
Received 2 Likes on 1 Post
Default

Nature has provided aluminum with a highly protective “skin” in
the form of a clear barrier oxide on its surface that forms quickly and
is tough enough to hinder the deeper intrusion of oxygen and
other gases and liquids to the subsurface aluminum atoms. This
oxide is tightly chemically bound to the underlying surface, and if
damaged, reforms immediately in most environments. On a freshly
abraded surface, the barrier oxide film is only 1 nm thick, but is highly effective in protecting the aluminum.

The oxide film develops slowly in normal atmospheres to greater
thicknesses, and when corrosive environments are present, the
oxide may both thicken and darken. However, it generally
retains its protective character. Thus, in normal environmental
exposure, aluminum does not corrode (rust) away as does steel.
Aluminum surfaces do oxidize when exposed to air, but this
differs from the oxidation of steel in two important ways:
Aluminum oxide is effectively transparent and invisible to the
unaided eye. Aluminum oxide clings tightly to the surface of aluminum and forms a protective film that blocks progressive deterioration.
It does not flake off, thereby exposing fresh surfaces to further oxidation. When damaged, it quickly reforms again, providing continuing
protection.

With this natural corrosion resistance, the aluminum bodies
of many commercial motor vehicles, rail cars and aircraft are
unpainted; aluminum has proven durability in such applications.


Coatings:

Anodizing:
Anodic coatings are among the most useful for many applications
because they:

Increase corrosion resistance.
Increase paint adhesion.
Increase adhesive bond durability.
Improve decorative appearance.
Increase abrasion resistance.

The basic approach in anodizing is to increase the thickness of the
natural oxide coating on aluminum by converting more of the
underlying aluminum surface to aluminum oxide while the part
being anodized is the anode in an electrolytic cell.

Chemical Conversion:
Chemical conversion coatings are adherent surface layers of lowsolubility metal oxide, phosphate, or chromate compounds produced
by the reaction of suitable reagents with the metal surface. They differ
from anodic coatings in that conversion coatings are formed by
a chemical oxidation-reduction reaction at the aluminum surface,
whereas anodic coatings are formed by an electrolytic reaction.

Painting:
Same as steel.


I had to take an SAE course on corrosion during a job where corrosion was causing major failures. So I just copied this out of the instruction manual.
Old 01-01-2005, 09:55 PM
  #5  
ivan111
Drifting
 
ivan111's Avatar
 
Member Since: Mar 2003
Location: Carolina
Posts: 1,569
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mighty-Mouse
Nature has provided aluminum with a highly protective “skin” in
the form of a clear barrier oxide on its surface that forms quickly and
is tough enough to hinder the deeper intrusion of oxygen and
other gases and liquids to the subsurface aluminum atoms. This
oxide is tightly chemically bound to the underlying surface, and if
damaged, reforms immediately in most environments. On a freshly
abraded surface, the barrier oxide film is only 1 nm thick, but is highly effective in protecting the aluminum.

The oxide film develops slowly in normal atmospheres to greater
thicknesses, and when corrosive environments are present, the
oxide may both thicken and darken. However, it generally
retains its protective character. Thus, in normal environmental
exposure, aluminum does not corrode (rust) away as does steel.
Aluminum surfaces do oxidize when exposed to air, but this
differs from the oxidation of steel in two important ways:
Aluminum oxide is effectively transparent and invisible to the
unaided eye. Aluminum oxide clings tightly to the surface of aluminum and forms a protective film that blocks progressive deterioration.
It does not flake off, thereby exposing fresh surfaces to further oxidation. When damaged, it quickly reforms again, providing continuing
protection.

With this natural corrosion resistance, the aluminum bodies
of many commercial motor vehicles, rail cars and aircraft are
unpainted; aluminum has proven durability in such applications.


Coatings:

Anodizing:
Anodic coatings are among the most useful for many applications
because they:

Increase corrosion resistance.
Increase paint adhesion.
Increase adhesive bond durability.
Improve decorative appearance.
Increase abrasion resistance.

The basic approach in anodizing is to increase the thickness of the
natural oxide coating on aluminum by converting more of the
underlying aluminum surface to aluminum oxide while the part
being anodized is the anode in an electrolytic cell.

Chemical Conversion:
Chemical conversion coatings are adherent surface layers of lowsolubility metal oxide, phosphate, or chromate compounds produced
by the reaction of suitable reagents with the metal surface. They differ
from anodic coatings in that conversion coatings are formed by
a chemical oxidation-reduction reaction at the aluminum surface,
whereas anodic coatings are formed by an electrolytic reaction.

Painting:
Same as steel.


I had to take an SAE course on corrosion during a job where corrosion was causing major failures. So I just copied this out of the instruction manual.

Wow thanks for that class!!!!!

Fabulous
Old 01-01-2005, 10:11 PM
  #6  
Runge_Kutta
Burning Brakes
 
Runge_Kutta's Avatar
 
Member Since: Feb 2000
Location: East Bay CA
Posts: 1,195
Likes: 0
Received 1 Like on 1 Post

Default

http://www.autoaluminum.org/corpub.pdf (The source of the previous lecture)
http://www.autoaluminum.org/reppub.pdf
http://www.autoaluminum.org/frame.htm

Last edited by Runge_Kutta; 01-01-2005 at 10:27 PM.
Old 01-01-2005, 10:20 PM
  #7  
usroute66 MKW
Pro
 
usroute66 MKW's Avatar
 
Member Since: Apr 2002
Location: CA
Posts: 693
Likes: 0
Received 1 Like on 1 Post

Default

When the A8 was first introduced a few years back - only one body shop in all of California was certified by Audi to repair the aluminum frame after a wreck. !
Old 01-01-2005, 10:26 PM
  #8  
SWCDuke
Race Director
 
SWCDuke's Avatar
 
Member Since: May 2000
Location: Redondo Beach USA
Posts: 12,487
Received 1,973 Likes on 1,188 Posts

Default

GM will void the corrosion warranty if they determine the car was ever driven on a wet road.

Duke
Old 01-01-2005, 10:29 PM
  #9  
LT1GMC
Drifting
 
LT1GMC's Avatar
 
Member Since: Apr 2000
Location: INDIANA
Posts: 1,311
Received 17 Likes on 13 Posts

Default

Corvettes since '84 have used quite a bit of aluminum in their construction, the whole rear section of frame and bumper support in the C4's, as well as almost all the suspension pieces,and northern state salt corrosion hasn't been a bit concern. The big problem is corrosion caused by dissimilar metal's electrolysis in the presence of moisture and salt. Note how many late '70's Oldsmobiles you have seen with bumpers falling off, they were using aluminum for the 5mph bumper support, without a proper insulation between the bumper shock mount and the aluminum bumper support. Hopefully the technology that has been developed to produce all the above mentioned cars(Jags and such) will be used to advantage in the new Z06.
Old 01-01-2005, 10:33 PM
  #10  
scorp508
Team Owner
 
scorp508's Avatar
 
Member Since: Mar 2000
Location: Boston, MA
Posts: 83,266
Received 41 Likes on 36 Posts

Default

I think I'd be more worried about Magnesium Chloride than some rock salt.
Old 01-02-2005, 10:14 AM
  #11  
YukonCornelius
Instructor
Thread Starter
 
YukonCornelius's Avatar
 
Member Since: Aug 2004
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Mighty-Mouse!
Old 01-02-2005, 10:30 AM
  #12  
burtonbl103
Team Owner
 
burtonbl103's Avatar
 
Member Since: Jan 2004
Location: Boston MA
Posts: 38,560
Received 594 Likes on 176 Posts
St. Jude Donor '06-'07-'08 & '12-'13

Default

Why in the name of god would you drive a vette in the Snow / Bad weather.
These cars DO NOT belong in these conditions!
Old 01-02-2005, 11:09 AM
  #13  
WhiteDiamond
Race Director
 
WhiteDiamond's Avatar
 
Member Since: Jan 2001
Location: Castle Rock CO
Posts: 11,182
Received 84 Likes on 55 Posts
St. Jude Donor '15

Default

Originally Posted by scorp508
I think I'd be more worried about Magnesium Chloride than some rock salt.
The mag chloride solution used by several states right now is much less reactive than salts used. Mag chloride should be used over salt in almost all situations, but there is some issue of possibly coating insulating materials and making them conductive.

Todd
Old 01-02-2005, 11:16 AM
  #14  
cbgpe
Drifting
Support Corvetteforum!
 
cbgpe's Avatar
 
Member Since: Dec 2002
Location: spring valley ny
Posts: 1,259
Received 9 Likes on 6 Posts

Default

The 5000 series of alluminum alloys (alluminium/magneseium) are used in boats for use in salt water with no problems. Don't worry about the frame, besides all the manufacturers have a "structural" corrosion test which is truely severe.
CBGPE
Old 01-02-2005, 12:29 PM
  #15  
rockettc
Racer
 
rockettc's Avatar
 
Member Since: Aug 2004
Posts: 260
Received 0 Likes on 0 Posts

Default

Originally Posted by burtonbl103
Why in the name of god would you drive a vette in the Snow / Bad weather.
These cars DO NOT belong in these conditions!
Well, if you're going to race on a frozen lake how else do you get there?
Old 01-02-2005, 12:48 PM
  #16  
yellow01
Le Mans Master
 
yellow01's Avatar
 
Member Since: Aug 2000
Location: Murphy TX
Posts: 8,762
Likes: 0
Received 2 Likes on 2 Posts

Default

I think we should be more worried here in Texas where they put enough sand on the road if it gets down to 33F that you'd be constantly sandblasting away the native oxide on your frame and nanometer by nanometer it would be slowly eroding away.

If I get one I'll probably just pay the dealer the $2000 for the 'underbody treatment' to avoid rust - since I'll also pay them for the 3M fabric treatment to avoid stains what's an extra few k?

:
Old 01-02-2005, 01:09 PM
  #17  
TheDarkKnight
Burning Brakes
 
TheDarkKnight's Avatar
 
Member Since: Jul 2003
Location: San Antonio Texas
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by burtonbl103
Why in the name of god would you drive a vette in the Snow / Bad weather.
These cars DO NOT belong in these conditions!

a. To get to work
b. TO go anywhere
c. It's a blast
d. It's still a car.
e. Why not?
f. Keeps them running all year round
g. It's a blast
h. Makes other drivers verrrry nervous and thus they tend to stay clear and slow down. Thus, I am contributing to the overall safety if the roads in my areas in the snow.
i. I use Zaino so snow/rain don't bother me when time for cleanup.
Old 01-02-2005, 10:16 PM
  #18  
FrankLT4
Advanced
 
FrankLT4's Avatar
 
Member Since: Mar 2001
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts

Default

I would not worry about it. Drive it. To prove my point go look at the oldest C4 you can find that has been driven in the salt and check out all the aluminum suspension pieces.
Old 01-02-2005, 10:23 PM
  #19  
LTC Z06
Get Some!

Support Corvetteforum!
 
LTC Z06's Avatar
 
Member Since: Oct 2001
Location: North Louisiana
Posts: 55,902
Received 59 Likes on 41 Posts

Default

Originally Posted by burtonbl103
Why in the name of god would you drive a vette in the Snow / Bad weather.
These cars DO NOT belong in these conditions!
Go live in Germany, that's 8 months out of the year!!!!

Get notified of new replies

To Aluminum Frame Problems for us Northern Folk...




Quick Reply: [Z06] Aluminum Frame Problems for us Northern Folk...



All times are GMT -4. The time now is 12:47 PM.