Header
02-27-2004, 12:21 PM
#1
Heel & Toe
Thread Starter
Member Since: Jan 2004
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Header
Who makes the best headers for an 81 Corvette? I looked at hedman nd hooker. However, hooker doesn't claim to have a set that will let you keep the emissions stuff. I know they MUST have some.
I'm looking to replace the stock exhaust manifolds, but retain the air tubes and such so the emissions will pass.
Crusher
:steering:
02-29-2004, 08:49 PM
#3
Racer
Member Since: Apr 2001
Location: Golden Colo.
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Re: Header (Crusher75060)
I bought Hedman because of the air injector piping welded in from the factory. I dont think there the best but for emmisions you don't have much choice.
02-29-2004, 11:46 PM
#4
Burning Brakes
Member Since: Nov 2002
Location: Phoenix Az
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Re: Header (82zoom)
I bought Hedman because of the air injector piping welded in from the factory. I dont think there the best but for emmisions you don't have much choice.
03-01-2004, 12:51 AM
#5
Team Owner
Member Since: May 2001
Location: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
Posts: 29,745
Likes: 0
Received 2 Likes
on
2 Posts
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: Header (phxraptor)
I am running Hedman headers, thermal coated, with the AIR pipes.
Part number is 68301-6 - costs about $475 from Summit or Jegs.
Hooker has some, but they run over 700 bucks and the Hedman's fit better and don't seem to have the ground clearance issues many others do.
Part number is 68301-6 - costs about $475 from Summit or Jegs.
Hooker has some, but they run over 700 bucks and the Hedman's fit better and don't seem to have the ground clearance issues many others do.
