msd timing retard how, where, do they make?
#1
Drifting
Thread Starter
Member Since: Mar 2003
Location: sussex nj
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
msd timing retard how, where, do they make?
i have a 6AL box and a rpm window switch i am running a tnt 100hp wet shot i am going to put in the 150hp jets i was told to get some sort of timing retarder do they make one that plugs into the msd box?how much does it retard?how doess it no when to do it do i need another window switch? :confused:
#2
Race Director
Re: msd timing retard how, where, do they make? (fiberglasscoffin)
:lurk:
I'm in the process of getting an MSD 6BTM. This device has a **** to retard the timing 3 degrees per pound of boost with a little **** that goes on the dash. Only thing is I'm not sure how I'd know in the first place how much my timing needs to be retarded. Does the 6AL hook up to the Knock sensor or something?
I'm in the process of getting an MSD 6BTM. This device has a **** to retard the timing 3 degrees per pound of boost with a little **** that goes on the dash. Only thing is I'm not sure how I'd know in the first place how much my timing needs to be retarded. Does the 6AL hook up to the Knock sensor or something?
#3
Drifting
Re: msd timing retard how, where, do they make? (vvv90)
my msd 6a just hooks to the coil on the cap and rotor? i am going to get a BTM as well:D
but i would think you can get the MSD timing retard and call MSD for further question but i think you can pull up to 15degree's out or retard:D
but i would think you can get the MSD timing retard and call MSD for further question but i think you can pull up to 15degree's out or retard:D
#4
Race Director
Re: msd timing retard how, where, do they make? (krivera)
BTW: I did some shopping around for my BTM and it's good I did.
Summit, Jegs, etc... sell the thing for ~$479
I did a search on the internet and found it sof r ~$335
THat's an incredible savings!
Summit, Jegs, etc... sell the thing for ~$479
I did a search on the internet and found it sof r ~$335
THat's an incredible savings!
#6
Drifting
Re: msd timing retard how, where, do they make? (fiberglasscoffin)
but since you have a 6A?- you can get the MSD Boost Timing Master part # MSD-5462 for 165.95 :D
that is what i might do i already have the 6A :D
that is what i might do i already have the 6A :D
#7
Race Director
Re: msd timing retard how, where, do they make? (krivera)
hmmm, that's strange, I thought I did a search last week and they wanted like ~$427.00 Oh well, I guess I'll just buy from summit then.
:cheers:
:cheers:
#8
Burning Brakes
Re: msd timing retard how, where, do they make? (vvv90)
Ive got a msd boost retard to hook up to an existing msd ignition if anyone would be interested.I got it several years ago and never used it.